Genuine Honda CR-V 2.2 Diesel Oil Filter 2013-2018 (15430RSRE01)

Safety

Oil filters are designed to filter out metallic powder or other contaminants generated within the oil due to oxidation, such as varnish or sludge, and return clean oil free of contaminants to the engine. If the oil filter becomes blocked and the relief valve remains open, contaminants cannot be removed from the oil and are circulated within the engine, which may result in engine damage.

Performance UNIQUE DESIGN WITH “IRREGULAR FOLDS The filter stores a unique series of folds to increase its surface area, resulting in superior filtration and operating life. When the engine is stopped, the design of these filters prevent oil from draining from oil channels throughout the engine. This ensures that oil is supplied to required areas as soon as the engine is restarted.

Facts Honda Genuine Oil Filters are tested for each series of engine and manufactured to provide optimal filtration

Helpful Information Remove the oil filter assembly using the oil filter wrench (P/N 04151-RBD-305 or equivalent). Use only socket type oil filter wrench to avoid damage to the oil filter cap. Separate the oil filter cap and oil filter element. Install the new O-rings and oil filter element to the oil filter cap. Apply new engine oil around the O-rings, then install the oil filter assembly to the oil filter housing. Tighten the oil filter assembly using the oil filter wrench (P/N 04151-RBD-305 or equivalent). Specified Torque: 25 N·m (2.5 kgf·m, 18 lbf·ft)